Updated October 2009.
Copyright© 2009. RS TechMedic BV. The Netherlands. All Rights Reserved.
RS TechMedic BV | Broeker Werf 6 | 1721 PC Broek op Langedijk | The Netherlands | Tel: +31-226-342044
Fax: +31-226-341446 | info@rstechmedic.com | COC: 37136895 | VAT: NL8090.54.085B01
Fax: +31-226-341446 | info@rstechmedic.com | COC: 37136895 | VAT: NL8090.54.085B01
Real-Time Remote Patient Monitoring
The interest for Remote Patient Monitoring is increasing rapidly. Hospital resources are not sufficient to cope with aging and the increasing load of patients with chronic diseases. That all makes that telemedicine and home based monitoring are finally considered to become mandatory. The main criteria for workable remote patient monitoring solutions are that they must be affordable, workable, efficient and financially competitive to in-hospital monitoring. Unfortunately most types of telemedicine are complicated to use and require the cooperation of the patient. To meet the criteria for succesful remote patient monitoring we offer an integrated solution that combines the medical parameter monitoring with the data transmission into a single device. The only user interface available is the on-off switch. RS TechMedic offers different solutions for different applications.
The interest for Remote Patient Monitoring is increasing rapidly. Hospital resources are not sufficient to cope with aging and the increasing load of patients with chronic diseases. That all makes that telemedicine and home based monitoring are finally considered to become mandatory. The main criteria for workable remote patient monitoring solutions are that they must be affordable, workable, efficient and financially competitive to in-hospital monitoring. Unfortunately most types of telemedicine are complicated to use and require the cooperation of the patient. To meet the criteria for succesful remote patient monitoring we offer an integrated solution that combines the medical parameter monitoring with the data transmission into a single device. The only user interface available is the on-off switch. RS TechMedic offers different solutions for different applications.
The available sensors:
- 3-lead ECG
- SpO2 finger sensor
The following alarms are available in the software:
- Tachycardia
- Bradycardia
- Pause
- ECG lead off
- No HR detected
- Low oxygen saturation
- Saturation sensor off
- Battery low
- Device switched on/off
Additional features:
- Because the device is using the internal GPRS module you do not need any infrastructure to start using the product. Just simply connect the device to the patient and you can start monitoring.
- Very intuitive user interface with limited set-up required.
- Excellent for home monitoring and nursing homes.
- 3-lead ECG
- SpO2 finger sensor
The following alarms are available in the software:
- Tachycardia
- Bradycardia
- Pause
- ECG lead off
- No HR detected
- Low oxygen saturation
- Saturation sensor off
- Battery low
- Device switched on/off
Additional features:
- Because the device is using the internal GPRS module you do not need any infrastructure to start using the product. Just simply connect the device to the patient and you can start monitoring.
- Very intuitive user interface with limited set-up required.
- Excellent for home monitoring and nursing homes.
Dyna-Vision© Ambulances
Dyna-Vision is the only device in the market to offer real-time streaming monitoring of vital signs via GPRS connections. With our solution it is possible to monitor the patient from any remote location in the world without delay and without loosing signal quality.
We support all cellular networks and are compatible with the quad-band mobile phone frequencies.
Dyna-Vision Ambulances is installed as a complete telemedicine solution. Patients can be monitored in the ambulance and a remote location simultaneously.
You can choose a 3, 5 or 12 lead configuration with a SpO2 sensor. There are different hardware solutions to mount the system in a vehicle. Contact us for more details.
Dyna-Vision is the only device in the market to offer real-time streaming monitoring of vital signs via GPRS connections. With our solution it is possible to monitor the patient from any remote location in the world without delay and without loosing signal quality.
We support all cellular networks and are compatible with the quad-band mobile phone frequencies.
Dyna-Vision Ambulances is installed as a complete telemedicine solution. Patients can be monitored in the ambulance and a remote location simultaneously.
You can choose a 3, 5 or 12 lead configuration with a SpO2 sensor. There are different hardware solutions to mount the system in a vehicle. Contact us for more details.
Dyna-Vision© VitalSignsLite
Many nursing homes and other health care institutes are caring for patients who occasionally need basic monitoring of their vital signs. This can be overnight during sleep, while doing therapy or when they receive medical treatment such as oxygen therapy. In all these cases vital signs monitoring is of great importance.
However, vital signs monitoring most often is expensive, inflexible and difficult for most untrained caregivers. For this application we developed Dyna-Vision VitalSignsLite, a very easy-to-use vital signs monitoring application.
The software is installed on a standard computer which can be located anywhere. The patients are connected to a Dyna-Vision Monitoring unit which transmits the basic vital signs to the central software. This transmission is done by GPRS so you do not need any infrastructure or data connections to the area where you want to monitor a patient !!!
Many nursing homes and other health care institutes are caring for patients who occasionally need basic monitoring of their vital signs. This can be overnight during sleep, while doing therapy or when they receive medical treatment such as oxygen therapy. In all these cases vital signs monitoring is of great importance.
However, vital signs monitoring most often is expensive, inflexible and difficult for most untrained caregivers. For this application we developed Dyna-Vision VitalSignsLite, a very easy-to-use vital signs monitoring application.
The software is installed on a standard computer which can be located anywhere. The patients are connected to a Dyna-Vision Monitoring unit which transmits the basic vital signs to the central software. This transmission is done by GPRS so you do not need any infrastructure or data connections to the area where you want to monitor a patient !!!
The available sensors:
- 3, 5 or 12 lead ECG configuration
- SpO2 sensor
Additional features:
- Continuous and real-time monitoring of the vital signs from any remote location
- Active Noise Reduction on the ECG signals
- Weight of the device is only 190 grams
- Wireless transmission without cables between the patient and the monitor
Your product can be delivered as ready-to-use package with a pre-installed and tested computer / laptop.
- 3, 5 or 12 lead ECG configuration
- SpO2 sensor
Additional features:
- Continuous and real-time monitoring of the vital signs from any remote location
- Active Noise Reduction on the ECG signals
- Weight of the device is only 190 grams
- Wireless transmission without cables between the patient and the monitor
Your product can be delivered as ready-to-use package with a pre-installed and tested computer / laptop.
Specifications Ambulance
Specifications Vital Signs Lite